Lunar Atlas

Lunar form by day. Illuminated terrain by night.

Lunar Atlas was designed to make the surface of the moon feel physical rather than flat.

With the lighting turned off, the 28-inch circular relief reveals a topographically accurate representation of the lunar surface through deeply carved craters, ridges, basins, and smaller changes in elevation. The dark hand-applied finish settles differently across the raised and recessed terrain, while lighter highlights catch along crater edges and higher areas of the carving. As the surrounding light changes throughout the day, those contours create shifting shadows and bring different details of the lunar landscape forward.

When illuminated, Lunar Atlas takes on a second identity. Concealed color-adjustable lighting spreads behind the circular profile and reflects against the wall, visually separating the moon from its surroundings and creating a floating halo. Warm tones can soften the piece and add ambient light to the room, while cool whites, blues, purples, and more expressive colors can give the lunar surface an entirely different atmosphere.

The underlying lunar relief began as a digital carving model based on the moon's topography. Smithereens transforms that model into each finished physical artwork through solid wood preparation, CNC carving, extensive sanding, staining, hand-applied highlighting, sealing, lighting installation, mounting, assembly, wiring, and final detailing.

Each Lunar Atlas is carved from 1.5-inch-thick solid pine and individually finished by Smithereens owner and artist, Skyler. Variations in the wood grain, carved surface, stain absorption, and hand-applied finishing give every completed piece its own subtle character.

At 28 inches in diameter, Lunar Atlas is large enough to function as a focal point without requiring the wall space of an oversized rectangular artwork. Its circular form works especially well above fireplaces, consoles, beds, desks, and other spaces where a strong centered composition creates balance.

Each completed Lunar Atlas is signed and sequentially numbered. No fixed edition size has been established, allowing the series to remain naturally limited by the time required to carve, finish, assemble, and complete each individual piece.

This is not simply an image of the moon transferred onto wood. Lunar Atlas turns the moon's actual terrain into a dimensional physical surface, then uses light to extend the artwork beyond the edge of the carving and into the room around it.

Artwork dimensions

Size Options:

Small Size: Approximately 12" W × 12" H

Medium Size: Approximately 22" W × 22" H

Large Size: Approximately 28" W × 28" H

Artwork thickness: Approximately 1.5 inches

Approximate installed wall projection: 2 inches

Approximate weight: 3-12 pounds

Because each piece is individually produced and finished, minor measurement variations may occur.

Materials and finish

Solid pine construction

Topographically accurate dimensional CNC-carved lunar relief

Deep carved craters, ridges, basins, and surface terrain

Visible natural wood grain and tonal variation

Individually sanded, stained, highlighted, and finished

Protective clear topcoat

Intended for indoor display only

Natural variations in grain, knots, joints, texture, coloration, and stain absorption are inherent characteristics of real wood and contribute to the individual appearance of each finished Lunar Atlas.

Note on natural wood movement

Solid wood naturally responds to changes in temperature and humidity. As the surrounding environment changes throughout the year, the wood may expand, contract, or develop slight variations in flatness.

Lunar Atlas is supported by a rear mounting structure that also creates the floating space needed for the concealed lighting effect. Normal seasonal wood movement cannot be eliminated entirely, and slight changes in curvature or surface flatness may occur over time.

For the most stable long-term display, keep the artwork indoors in a reasonably temperature-controlled environment. Avoid prolonged exposure to excessive humidity, extremely dry conditions, direct heat, intense sunlight, or heating and air-conditioning vents.

If displaying above a fireplace, the wall and artwork should remain within normal indoor temperatures and should not be exposed to excessive direct heat.

Minor seasonal movement should not materially affect the artwork's carved detail, lighting function, or overall appearance.

Lighting

Optional Concealed Govee RGBIC lighting installed behind the artwork

Adjustable brightness and a wide range of colors and lighting scenes

Backlighting creates a floating halo around the circular profile

Govee app control

Physical controller included

Compatible with Amazon Alexa and Google Assistant

Standard plug-in power connection

Lighting components remain concealed from normal front viewing

Lighting appearance will vary depending on wall color, ambient room brightness, selected color and brightness, and nearby surfaces.

Mounting

Rear floating spacer and mounting structure

French cleat already installed on the artwork

Matching wall-side cleat included

Mounting hardware and hanging instructions included

The open area behind the artwork provides space for concealed wiring and, when properly positioned, may accommodate a wall outlet behind the piece.

Any outlet positioned behind the artwork must leave sufficient clearance for the power adapter, plug, wiring, and mounting structure.

Your purchase includes:

• The artwork shown
  
• Installed Govee RGBIC lighting
  
• Attached spacer and artwork-side French cleat
  
• Matching wall-side French cleat
  
• Hanging hardware
  
• Power supply and lighting controls
  
• Installation and care instructions
  
• Signed certificate of authenticity
  

The artwork arrives assembled and ready for installation. The customer does not need to attach the lighting or build the floating mounting structure.

This piece arrives with a premium Govee Strip Light professionally installed behind the artwork. Simply plug it into a standard wall outlet and connect it to the Govee Home app to personalize the lighting.

The lighting reflects against the wall behind the artwork, outlining its natural silhouette and creating a soft floating effect.

Through the free Govee Home app, you can:

• Turn the lighting on or off
• Adjust the brightness
• Choose from millions of colors
• Select white-light options
• Display multiple colors at the same time
• Choose from preset lighting scenes
• Create personalized color combinations and effects
• Sync lighting effects to music
• Set schedules and timers

The attached control box can also be used for convenient basic operation without opening the app.

The lighting is compatible with Amazon Alexa and Google Assistant for supported voice controls.

You can keep the lighting warm and subtle for everyday ambiance, coordinate it with the colors of a room, or use a more dramatic color effect when entertaining. Brightness can be lowered to create a gentle evening glow or increased when you want the illuminated silhouette to become a stronger part of the room.

The artwork does not need to remain illuminated. This piece was designed to stand on its own as dimensional wood artwork during the day, with the lighting adding an entirely different presence after dark.

Smart controls require the customer to complete the applicable Govee account, app, Wi-Fi, and third-party smart-home setup. Available commands and features may vary between the Govee Home app and connected voice-assistant platforms.

The installed Govee Strip Light uses LED lamp beads rated by Govee for up to 30,000 or more operating hours.

To put that into perspective, 30,000 hours would equal approximately:

• 20 years when used 4 hours per day
• 10 years when used 8 hours per day
• Nearly 7 years when used 12 hours per day

These examples are estimates based on the manufacturer’s rated operating hours. Actual longevity can vary based on brightness, daily use, operating temperature, ventilation, power conditions, and the lifespan of the controller and power supply. Using the lighting at a moderate brightness rather than continuously at full output may help reduce heat and support longer-term performance.

The lighting system is also designed to be serviceable rather than treated as a permanent, irreplaceable part of the artwork. The strip is secured behind the artwork with removable mounting clips, allowing it to be accessed, adjusted, removed, or replaced without altering the carved face of the piece.

If the lighting eventually dims, stops working, or becomes outdated, it can be replaced with the same Govee model, if still available, or with another compatible lighting system. This also gives the owner the option to upgrade the artwork with newer lighting technology in the future.

The lighting should only be operated indoors and should not be exposed to moisture, excessive heat, or restricted ventilation.

Your artwork arrives with a French cleat mounting system already installed on the back of the artwork. To hang the piece, secure the included wall-side cleat in the desired location, confirm that it is level, and carefully lower the artwork onto the cleat until it is fully seated.

The French cleat distributes the artwork’s weight across a wider area, helps keep the piece level, and allows it to sit securely and evenly against the wall.

Included mounting hardware:
Wall-side French cleat, level, mounting screws, and drywall anchors.

Recommended installation tools:
Pencil, measuring tape, stud finder, screwdriver or drill.

Because of the artwork’s size and weight, installation by at least two adults is strongly recommended. The wall cleat should be secured directly into wall studs whenever possible. When studs are not available, use fasteners that are specifically rated for your wall material and for more than the artwork’s total installed weight.

The included drywall anchors may not be appropriate for every wall type. Plaster, masonry, concrete, metal studs, tile, and other specialty surfaces may require different hardware. The purchaser or installer is responsible for confirming that the mounting method and fasteners are suitable for the specific wall and installation location.

Detailed hanging instructions are included with the artwork. If you are uncertain about the wall construction, hardware requirements, or your ability to safely install the piece, please hire a qualified handyman, contractor, or professional art installer.

Yes. This piece uses a standard plug-in power cord to provide reliable, full-strength illumination. A battery-operated system powerful enough to create the same level of ambient backlighting would require frequent charging or battery replacement and would not provide the same consistent performance.

The included cord is relatively slim and can simply hang down to a nearby outlet. In most rooms, it remains visually unobtrusive and does not significantly distract from the artwork. For a cleaner, more concealed installation, several options are available.

Outlet positioned behind the artwork

A standard or recessed outlet may be positioned behind the artwork so the cord and power connection remain hidden within the open area of the rear spacer frame.

The usable interior space within the spacer is approximately 37 inches wide by 10 inches tall. Before installing or relocating an outlet, carefully measure the artwork’s intended position and confirm that the outlet will fall inside this open area. The outlet, plug, adapter, and excess cord must fit within the available space without being pinched between the artwork and the wall.

A recessed outlet provides the lowest-profile appearance and creates additional space for the plug and adapter. Any new outlet or electrical modification should be completed by a qualified electrician and must comply with applicable local electrical codes.

Paintable cord cover

A low-profile cable raceway can be used to guide the cord from the artwork to a nearby outlet. Paintable raceways can be matched to the wall color, helping the cord blend into the room without requiring electrical work.

Routing behind furniture or architectural features

Depending on the placement of the artwork, the cord may also be routed behind a mantel, console table, cabinet, plant, or another architectural feature.

Important installation notes

Do not pinch, sharply bend, staple, puncture, or place mounting hardware through the power cord. Never run a standard plug-in cord or power adapter inside the wall. Only use electrical components and installation methods specifically approved for in-wall use.

Plan the artwork placement, outlet location, and cord route before installing the wall cleat. When electrical work or outlet relocation is needed, use a qualified electrician.

Availability: Limited Run - Made in Small batches. Once gone, they’re gone.

Shipping: Free (Lower 48)

Origin: Handcrafted in Utah, USA

Smithereens warrants the original purchaser against defects in the assembly, installed mounting components, and installation of the lighting system for 2 years from the delivery date under normal indoor use.

This warranty does not cover damage caused by improper installation, unsuitable wall fasteners, falls, impact, moisture, excessive heat, sunlight, misuse, unauthorized modifications, normal finish aging, or natural movement and variation within the wood.

Electronic lighting components may also be subject to the applicable manufacturer’s warranty. Manufacturer coverage, eligibility, and claim requirements depend on the specific product and purchase terms.

Gently remove dust with a clean, dry microfiber cloth or a soft-bristled brush. Use light pressure when cleaning the carved details, edges, and recessed areas.

Do not apply water, household cleaners, furniture polish, oils, solvents, or abrasive materials directly to the artwork

Display Mountain Cathedral indoors in a dry, temperature-controlled environment. Avoid prolonged exposure to direct sunlight, excessive humidity, smoke, moisture, and strong heat sources, including fireplaces, radiators, and heating vents.

Natural wood may gradually change in tone over time. Keeping the artwork away from intense sunlight and major temperature or humidity changes will help preserve its appearance and finish.