Rooted Flame

Form by day. Firelight by night.

Rooted Flame was designed to have two distinct identities.

With the lighting turned off, the deeply carved contours and visible hevea hardwood grain create natural highlights and shadows throughout the tree. Flowing roots rise into a twisting trunk and branching canopy, giving the design a sense of upward movement that shifts between an ancient tree, a living flame, and a force of nature.

When illuminated, the artwork takes on an entirely different presence. Light spreads behind the floating silhouette and reflects softly against the wall, adding depth, color, and atmosphere without exposing individual LED points around the edges. A warm amber glow emphasizes the natural warmth of the wood, while red or more expressive colors give the carving a dramatic, elemental character.

The underlying tree relief began as a digital carving model. Smithereens transformed that model into this finished physical artwork through material selection, panel preparation, CNC carving, sanding, finishing, lighting installation, mounting, assembly, and final detailing.

The wood grain, carved surface, tonal variation, lighting presentation, and final appearance were individually developed for this piece by Smithereens owner and artist, Skyler. Because Rooted Flame is a very limited run of 10 pieces, once gone it will not be recreated with the same materials, grain patterns, coloring, and finished appearance.

At five feet tall, the piece has a substantial architectural presence suited to entryways, stair landings, tall walls, and other spaces that need a strong vertical focal point.

This is not a print, a flat sign, or a factory-produced lighting fixture. It is a finished physical work of art created to bring movement, texture, presence, and atmosphere into the room around it.

Artwork dimensions

Height: Approximately 60 inches

Width: Approximately 30 inches

Artwork thickness: Approximately 1.5 inches

Approximate installed wall projection: 2 inches

Approximate weight: 40 pounds

Because each piece is individually made and finished, minor measurement variations may occur.

Materials and finish

Solid hevea hardwood construction

Dimensional CNC-carved tree relief

Integrated wood border

Deeply carved roots, trunk, branches, and canopy

Visible natural wood grain and tonal variation

Individually sanded and finished

Protective clear topcoat

Intended for indoor display only

Natural variations in grain, joints, knots, texture, and coloration are inherent characteristics of solid hardwood and are part of the finished artwork. Hevea hardwood panels are constructed from multiple joined sections of wood, so transitions in grain pattern and color may remain visible throughout the piece.

Note on natural wood movement

Solid wood naturally responds to changes in temperature and humidity. As the surrounding environment changes throughout the year, the wood may expand, contract, or develop slight variations in flatness.

Rooted Flame is constructed with an integrated border for added rigidity. The artwork is also attached to its rear mounting structure using movement-accommodating fasteners, allowing the wood a limited amount of seasonal movement rather than holding it completely rigid.

These construction methods are intended to help manage normal wood movement, but they cannot eliminate it entirely. Slight changes in curvature, alignment, or surface flatness may occur over time and are considered natural characteristics of solid wood rather than signs that the artwork is failing.

For the most stable long-term display, keep the artwork indoors in a reasonably temperature-controlled environment. Avoid prolonged exposure to excessive humidity, very dry conditions, direct heat, strong sunlight, fireplaces, radiators, and heating or air-conditioning vents.

Minor seasonal movement should not materially change the artwork’s overall appearance, carved detail, or visual impact.

Lighting

Concealed lighting system installed behind the artwork

Adjustable brightness, colors, and lighting scenes

Smooth, diffused backlighting without visible individual LED points

App, physical controller, and compatible smart-home controls

Removable clip-mounted installation for future servicing or replacement

Standard plug-in power connection

Mounting

Rear floating spacer structure

French cleat already installed on the artwork

Wall-side cleat included

Mounting screws, drywall anchors, level, and instructions included

Installation by two adults is strongly recommended due to the artwork’s height and approximate 40-pound weight

The open interior area within the rear spacer provides room for concealed wiring and a properly positioned wall outlet. Any outlet intended to sit behind the artwork must fit within this opening and leave sufficient room for the power adapter and plug.

Your purchase includes:

• The exact artwork shown
  
• Installed Govee COB lighting
  
• Attached spacer and artwork-side French cleat
  
• Matching wall-side French cleat
  
• Hanging hardware
  
• Power supply and lighting controls
  
• Installation and care instructions
  
• Signed certificate of authenticity
  

The artwork arrives assembled and ready for installation. The customer does not need to attach the lighting or build the floating mounting structure.

This piece arrives with a premium Govee COB Strip Light Pro (Their highest model) professionally installed behind the artwork. Simply plug it into a standard wall outlet and connect it to the Govee Home app to personalize the lighting.

Unlike traditional LED strips, COB lighting uses a very high concentration of closely spaced LEDs to create a smoother, more continuous glow with fewer visible points of light. The lighting reflects against the wall behind the artwork, outlining its natural silhouette and creating a soft floating effect.

Through the free Govee Home app, you can:

• Turn the lighting on or off
• Adjust the brightness
• Choose from millions of colors
• Select white-light options
• Display multiple colors at the same time
• Choose from preset lighting scenes
• Create personalized color combinations and effects
• Sync lighting effects to music
• Set schedules and timers

The attached control box can also be used for convenient basic operation without opening the app.

The lighting is compatible with Amazon Alexa and Google Assistant for supported voice controls. Because this Govee model also supports Matter, it can be connected to compatible smart-home platforms, including Apple Home and Siri, depending on the devices and smart-home setup being used.

You can keep the lighting warm and subtle for everyday ambiance, coordinate it with the colors of a room, or use a more dramatic color effect when entertaining. Brightness can be lowered to create a gentle evening glow or increased when you want the illuminated silhouette to become a stronger part of the room.

The artwork does not need to remain illuminated. This piece was designed to stand on its own as dimensional wood artwork during the day, with the lighting adding an entirely different presence after dark.

Smart controls require the customer to complete the applicable Govee account, app, Wi-Fi, and third-party smart-home setup. Available commands and features may vary between the Govee Home app and connected voice-assistant platforms.

The installed Govee COB Strip Light uses LED lamp beads rated by Govee for up to 30,000 or more operating hours.

To put that into perspective, 30,000 hours would equal approximately:

• 20 years when used 4 hours per day
• 10 years when used 8 hours per day
• Nearly 7 years when used 12 hours per day

These examples are estimates based on the manufacturer’s rated operating hours. Actual longevity can vary based on brightness, daily use, operating temperature, ventilation, power conditions, and the lifespan of the controller and power supply. Using the lighting at a moderate brightness rather than continuously at full output may help reduce heat and support longer-term performance.

The lighting system is also designed to be serviceable rather than treated as a permanent, irreplaceable part of the artwork. The strip is secured behind the artwork with removable mounting clips, allowing it to be accessed, adjusted, removed, or replaced without altering the carved face of the piece.

If the lighting eventually dims, stops working, or becomes outdated, it can be replaced with the same Govee model, if still available, or with another compatible lighting system. This also gives the owner the option to upgrade the artwork with newer lighting technology in the future.

The lighting should only be operated indoors and should not be exposed to moisture, excessive heat, or restricted ventilation.

Your artwork arrives with a French cleat mounting system already installed on the back of the artwork. To hang the piece, secure the included wall-side cleat in the desired location, confirm that it is level, and carefully lower the artwork onto the cleat until it is fully seated.

The French cleat distributes the artwork’s weight across a wider area, helps keep the piece level, and allows it to sit securely and evenly against the wall.

Included mounting hardware:
Wall-side French cleat, level, mounting screws, and drywall anchors.

Recommended installation tools:
Pencil, measuring tape, stud finder, screwdriver or drill.

Because of the artwork’s size and weight, installation by at least two adults is strongly recommended. The wall cleat should be secured directly into wall studs whenever possible. When studs are not available, use fasteners that are specifically rated for your wall material and for more than the artwork’s total installed weight.

The included drywall anchors may not be appropriate for every wall type. Plaster, masonry, concrete, metal studs, tile, and other specialty surfaces may require different hardware. The purchaser or installer is responsible for confirming that the mounting method and fasteners are suitable for the specific wall and installation location.

Detailed hanging instructions are included with the artwork. If you are uncertain about the wall construction, hardware requirements, or your ability to safely install the piece, please hire a qualified handyman, contractor, or professional art installer.

Yes. This piece uses a standard plug-in power cord to provide reliable, full-strength illumination. A battery-operated system powerful enough to create the same level of ambient backlighting would require frequent charging or battery replacement and would not provide the same consistent performance.

The included cord is relatively slim and can simply hang down to a nearby outlet. In most rooms, it remains visually unobtrusive and does not significantly distract from the artwork. For a cleaner, more concealed installation, several options are available.

Outlet positioned behind the artwork

A standard or recessed outlet may be positioned behind the artwork so the cord and power connection remain hidden within the open area of the rear spacer frame.

The usable interior space within the spacer is approximately 37 inches wide by 10 inches tall. Before installing or relocating an outlet, carefully measure the artwork’s intended position and confirm that the outlet will fall inside this open area. The outlet, plug, adapter, and excess cord must fit within the available space without being pinched between the artwork and the wall.

A recessed outlet provides the lowest-profile appearance and creates additional space for the plug and adapter. Any new outlet or electrical modification should be completed by a qualified electrician and must comply with applicable local electrical codes.

Paintable cord cover

A low-profile cable raceway can be used to guide the cord from the artwork to a nearby outlet. Paintable raceways can be matched to the wall color, helping the cord blend into the room without requiring electrical work.

Routing behind furniture or architectural features

Depending on the placement of the artwork, the cord may also be routed behind a mantel, console table, cabinet, plant, or another architectural feature.

Important installation notes

Do not pinch, sharply bend, staple, puncture, or place mounting hardware through the power cord. Never run a standard plug-in cord or power adapter inside the wall. Only use electrical components and installation methods specifically approved for in-wall use.

Plan the artwork placement, outlet location, and cord route before installing the wall cleat. When electrical work or outlet relocation is needed, use a qualified electrician.

Availability: Limited Edition run of 10. Once gone, they’re gone.

Shipping: Free (Lower 48)

Origin: Handcrafted in Utah, USA

Smithereens warrants the original purchaser against defects in the assembly, installed mounting components, and installation of the lighting system for 2 years from the delivery date under normal indoor use.

This warranty does not cover damage caused by improper installation, unsuitable wall fasteners, falls, impact, moisture, excessive heat, sunlight, misuse, unauthorized modifications, normal finish aging, or natural movement and variation within the wood.

Electronic lighting components may also be subject to the applicable manufacturer’s warranty. Manufacturer coverage, eligibility, and claim requirements depend on the specific product and purchase terms.

Gently remove dust with a clean, dry microfiber cloth or a soft-bristled brush. Use light pressure when cleaning the carved details, edges, and recessed areas.

Do not apply water, household cleaners, furniture polish, oils, solvents, or abrasive materials directly to the artwork

Display Mountain Cathedral indoors in a dry, temperature-controlled environment. Avoid prolonged exposure to direct sunlight, excessive humidity, smoke, moisture, and strong heat sources, including fireplaces, radiators, and heating vents.

Natural wood may gradually change in tone over time. Keeping the artwork away from intense sunlight and major temperature or humidity changes will help preserve its appearance and finish.